Appearance
Deadband
Ignores small excursions of a double signal. Inside the band [lower, upper] the output is 0. Outside it, Shift mode outputs the distance past the band edge (in − upper above, in − lower below), so the output is continuous; Zero-hold mode passes the input through unchanged, which is the classic governor frequency-deadband form. If lower is set above upper, the simulator logs an error and swaps them.
Category: Nonlinear
Ports
| Port | Kind | Signal | Notes |
|---|---|---|---|
in | Control input | Real | |
out | Control output | Real |
Parameters
| Parameter | Type | Default | Units | Description | ID |
|---|---|---|---|---|---|
| Lower edge | Number | -0.5 | — | Lower edge of the band. Must not exceed the upper edge. | lower |
| Upper edge | Number | 0.5 | — | Upper edge of the band. | upper |
| Mode | Choice: Shift / Zero-hold | Shift | — | Shift = output the distance past the band edge (continuous). Zero-hold = output 0 inside the band and the input itself outside it (jumps at the edges). | mode |